The PARIS Forums


Home » The PARIS Forums » PARIS: Classifieds » Selling Paris gear [Closed] All selled !
Selling Paris gear [Closed] All selled ! [message #108912] Sun, 13 September 2015 23:00 Go to next message
danielcornelius is currently offline  danielcornelius   GERMANY
Messages: 171
Registered: May 2012
Senior Member
I like to sell :
1 x Output - 120 €
1 x Input - 120 €
2 x Adat - 135 € 2x Sold no Adat Cards left
2 x MEC - 100 €
2 x CS16 - 60 €
2 x EDS1000- 150€
1 x Universal Audio Twin Finty 4710d(new)- 2000€
1 x UAD2 Solo Core 220 €

Each card 120€
CS16 70 €
MEC 100 €
EDS 150 €

+shipping worldwide
USA beginn 8.00€ for cards and 36.00 Mec and CS16
Europe 16.00 €


everthing is in good or very good condition.

Best regards
Dan


----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit

[Updated on: Fri, 22 April 2016 12:49]

Report message to a moderator

Re: Selling Paris gear [message #108913 is a reply to message #108912] Tue, 15 September 2015 12:02 Go to previous messageGo to next message
pdoros is currently offline  pdoros   ITALY
Messages: 10
Registered: October 2011
Location: CYPRUS
Junior Member

Hi

Am interested to expand my paris system.
I already have a Mec module with EDS1000 and control16.

Do i need a second MEC module to add an other EDS1000 and an other control16?

Please advice. Might get also one input 8 card for mec module.

Thank you in advance

Doros

PS

please give me a shipping cost to CYPRUS.
Re: Selling Paris gear [message #108914 is a reply to message #108913] Thu, 17 September 2015 09:12 Go to previous messageGo to next message
danielcornelius is currently offline  danielcornelius   GERMANY
Messages: 171
Registered: May 2012
Senior Member
What you like to do ?
The 8 Input Card into first Mec ?
In this case you don't need a second mec.
If you like to take a two card system to record, you need a 2nd mec.

I have ribbons for connecting 2 EDS with each other too.

I will check the shipping coast to cyprus

Best regards
Dan



----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit

[Updated on: Sun, 20 September 2015 03:56]

Report message to a moderator

Re: Selling Paris gear [message #108915 is a reply to message #108912] Fri, 18 September 2015 00:00 Go to previous messageGo to next message
pdoros is currently offline  pdoros   CYPRUS
Messages: 10
Registered: October 2011
Location: CYPRUS
Junior Member

I need a second eds1000 and a second Control16 for sure

So please advice about connections. Do i need a second MEC?
Re: Selling Paris gear [message #108916 is a reply to message #108915] Fri, 18 September 2015 00:44 Go to previous messageGo to next message
kerryg is currently offline  kerryg   CANADA
Messages: 1529
Registered: February 2009
Senior Member
Administrator
You don't necessarily need a second MEC, you can run a two card system with a single MEC - if you just have one, the audio from both EDS cards is pre-mixed and flows through it.

Getting a second MEC is really about getting more inputs and outputs (MECs are limited to 20 active channels of i/o at a time - the built in i/o plus two active cards (say an ADAT card and an 8i, or any other combination). You can have eight cards in one MEC, but only two can be active at one time.


"... being bitter is like swallowing poison and waiting for the other guy to die..." - anon

[Updated on: Fri, 18 September 2015 18:14]

Report message to a moderator

Re: Selling Paris gear [message #108917 is a reply to message #108912] Fri, 18 September 2015 03:50 Go to previous messageGo to next message
pdoros is currently offline  pdoros   CYPRUS
Messages: 10
Registered: October 2011
Location: CYPRUS
Junior Member

Thanks Kerry. Will see whats needed to get a nice expansio pack for my Paris system.
Re: Selling Paris gear [message #108918 is a reply to message #108912] Fri, 18 September 2015 06:42 Go to previous messageGo to next message
Will The Weirdo is currently offline  Will The Weirdo   MEXICO
Messages: 189
Registered: December 2009
Location: On The Lake
Senior Member

Dan,
Are you selling off you whole PARIS rig?
If yes, what are you jumping to?
Re: Selling Paris gear [message #108919 is a reply to message #108918] Sat, 19 September 2015 07:10 Go to previous messageGo to next message
danielcornelius is currently offline  danielcornelius   GERMANY
Messages: 171
Registered: May 2012
Senior Member
@Will
not the whole Paris Stuff, but i have buyed a lot of Stuff in the past.Some Stuff i have lease to friend and get it back now.
I have "jumped" to Universal Audio Apollo now.
So my Setup today is :
Apollo Quad
1x Paris MEC /2 Adat/ 8 input / 8 output
RME 9652
RME 9632
Universal Audio UAD2 Quad
UA Twin Finity 4710d
UA Compressor 1176ae
to go into DAW. With Paris i have 32 I/O. Thats enough, i have decided !
In the Past were 16 I/O Adats in my DAW blocked by E6400 Sampler. I will rout them over RME 5652 into my System.
I have used two 4710d going into second MEC.
The Third MEC was fillend by other Romplers (Proteus 1000 & 2x2000, An1x,X3,ChaosPad)and so on.
Apollo is real good. The special is, you can use your plugins in realtime !

Have a nice Weekend everyone.


@Kerry
THX to Kerry...for "You don't necessarily need a second MEC, you can run a two card system with a single MEC - if you just have one, the audio from both EDS cards is pre-mixed and flows through it. ", thats exactly what i like to say !

Have a nice Weekend too !


----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit

[Updated on: Sat, 19 September 2015 07:17]

Report message to a moderator

Re: Selling Paris gear [message #109079 is a reply to message #108919] Mon, 25 January 2016 10:40 Go to previous messageGo to next message
easyphaee is currently offline  easyphaee   
Messages: 5
Registered: December 2013
Location: Toulouse, France
Junior Member
Hi there,

is there any chance you're still selling paris gear stuff ?
I am looking for a MEC with at least 8i/8out

Other wise a second 442 but I'm sure we could link them..?


Best regards,

E


Re: Selling Paris gear [message #109134 is a reply to message #109079] Mon, 11 April 2016 06:58 Go to previous message
danielcornelius is currently offline  danielcornelius   GERMANY
Messages: 171
Registered: May 2012
Senior Member
Hi, there is some Parisgear left, that i like to sell.

Shippingcoast for cards :
7€ Worldwide.

Shippimgcoast for Mec and CS16
36€

Feel free to contact me !



----------------------------
- Asio Driver Cubase 5LE,Cubase 12
- Asus Z97-C, LGA 1150
- Intel i5 2320
- 32GB RAM
- 4x Seagate Barracuda 750GB
- Win10 64 bit
Previous Topic: EDS cards, C-16's, 442"s
Next Topic: FS: Complete System
Goto Forum:
  


Current Time: Thu Mar 28 12:20:21 PDT 2024

Total time taken to generate the page: 0.01869 seconds